note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: ra0084b doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / sdad10 3 _ _ _ _ _ _ _ _ screening 2 / __ = not screened tx = tx level txv = txv level s = s level reverse recovery time uf = ultra fast recovery time voltage 2.5 = 2.5kv, 5 = 5kv, 7.5 = 7.5kv, 10 = 10kv, and 15 = 15kv power rating (see below) package size = 3 inches diameter sdad103 uf series 2,500 to 15,000 volts ultra fast recovery stackable high voltage rectifier features: ? stackable to 600 kv+ ? piv 2.5kv to 15kv ? high current ratings ? ultra fast reverse recovery time ? only hermetically sealed rectifiers used ? controlled avalanche rated ? modular design for easy stacking ? storage and operating temps -65 c to +150 c ? available in fast and hyper fast versions ? tx, txv, and s-level screening available 2 / electrical characteristics 3 / part number peak inverse voltage reverse recovery time 5 / average dc output current 4 / tc = case temperature surge non- repetitive maximum forward voltage drop maximum leakage current @piv piv (kv) max (ns) if(avg) ifsm vf (v) if (a) ir (ua) 25 ? c 25 ? c 75 ? c 50 ? c 60 ? c 100 ? c 25 ? c 25 ? c sdad103 h 2.5 uf 2.5 70 9.00 14.4 11.2 200 3.90 7.20 30 sdad103 h 5.0 uf 5.0 70 6.75 10.8 8.46 200 7.60 5.40 30 sdad103 h 7.5 uf 7.5 70 4.50 7.20 5.58 200 10.10 3.60 20 sdad103 h 10 uf 10 70 3.15 4.50 4.00 125 13.85 2.25 10 sdad103 h 15 uf 15 70 2.14 3.00 2.65 125 19.2 1.44 10 sdad103 package: notes: 1 / for ordering information, price, curves, and availability- contact factory. 2 / screening based on mil-prf-19500. screening flows available on request. 3 / unless otherwise specified, all electrical characteristics @25oc. 4 / tc = 50 oc typical operation in oil. tc = 75 oc is typical ambient ta = 25 oc unheatsunk. tc = 60 oc typical operation with extender plates in air. 5 / recovery conditions: i f = 0.5 amp, i r = 1.0 amp rec. to .25 amp.
|
